Avery Dennison 6030 Operator Handbook - Manual (Page 46)

Selecting Bar Codes for Scanning –––––––––––––––––––––––––––––
You must enable and disable each specific bar code type for
scanning. You can scan any bar code listed below.
UPC/EAN CODABAR LAC CODE39 Code 128
I2of5 MSI MaxiCode
n
✦ You must select 1 check digit or 2 check digits for MSI bar
codes.
✦ You must enable or disable function codes for Code 128
bar codes.
✦ You must enable or disable supplements for UPC/EAN bar
codes.
To enable or disable a bar code for scanning:
1. From the CONFIG. MENU, press > until you see:
Shutdown Timer
Scanner
2. Press e . You will see:
SCANNER MENU
UPC/EAN
3. Press e . You will see:
UPC/EAN
Enable
n
When UPC/EAN is enabled, you can scan UPCA, UPCE,
EAN8, EAN13, or LAC bar codes.
6030 Operator’s Handbook
6-6