Avery Dennison 6030 Operator Handbook - Manual (Page 15)

Chapter 3. Loading Supplies
The printer uses thermal supplies:
✦ synthetic labels
✦ paper labels and tags
✦ specialty paper (non-peel mode only)
See Appendix B, "Specifications and Accessories," for
available supply sizes.
Loading Supplies––––––––––––––––––––––––––––––––––––––––––––
There are two methods for loading supplies:
✦ Peel mode is for labels only. Labels must be loaded in
Peel mode when the On-Demand sensor is enabled.
✦ Non-Peel mode is for tags, strips of labels, or specialty
paper. Supply must be loaded in Non-Peel mode when
printing in continuous mode.
3-1