Avery Dennison 6030 Operator Handbook - Manual (Page 80)

Checking the Printhead
The Printhead test checks for
✦ dot resistance
✦ temperature.
The dot resistance test checks each dot on the printhead and
takes approximately four minutes.
The temperature test checks the working temperature range of
the printhead. The temperature of the printer depends upon
the number of labels printed and the operating environment.
Temperature Printhead Temperature
32°
70°
100° 1019
533
296
To run the Dot Resistance test:
1. From the HDW TEST MENU, press > until you see:
Sensors
Printhead
2. Press e . You will see:
PRINTHEAD TESTS
Dot Resistance
3. Press e . You will see the message AVG DOT = ###.
Valid values are 270-313.
6030 Operator’s Handbook
10-14