beautypg.com

Setting communications parameters 5-5 – Avery Dennison 6030 Operator Handbook User Manual

Page 39

background image

Press

e

to send data collection records.

-OR-

Press

>

to select a Lookup Table (1-10) to send to

the host, and then press

e

.

Each time you successfully transmit records, you will
see TRANSMISSION COMPLETE.

6. When you are finished sending data:

a. Press b

until you see the MAIN MENU.

b. Disconnect the cable from the printer.

n

Make sure you grasp the connector when removing the
communications cable. DO NOT pull on the cord.

Setting Communications Parameters ––––––––––––––––––––––––––

You can use the Serial Port menu in the Command mode to

set the communications parameters to match your host.

enable/disable the echo of the BEL character.

enable/disable ENQ polling (status polling).

To set these parameters:

1. From the MAIN MENU, press

>

until you see:

Start App.
Data Transfer

2. Press

e

. You will see:

TRANSFER MENU
Receive

Chapter 5. Transferring Data

5-5