Avery Dennison 6030 Operator Handbook - Manual (Page 36)

2. Plug the mini-DIN connector of the cable into the printer.
n
Make sure the flat side of the connector faces the front of the
printer.
3. Plug the other end of the cable into the RS-232 serial port
on the host.
4. Turn the printer on.
5. Select Send or Receive from the DATA TRANSFER menu.
See "Receiving Data" or "Sending Data" in this chapter.
n
To remove the cable, grasp the connector and gently pull it
from the port. DO NOT pull on the cable.
Communications
Port
Mini-DIN
Connector
6030 Operator’s Handbook
5-2