Avery Dennison 6030 Operator Handbook - Manual (Page 43)

2. Press e . You will see:
On-Demand
Disable
3. Press 1 to select Enable or 2 to select Disable.
4. Press e .
Setting the Time and Date ––––––––––––––––––––––––––––––––––––
If time and/or date are already set, you will see the current
time or date. To set the time and date:
1. From the CONFIG. MENU, press > until you see:
On-Demand
Clock/Calender
2. Press e . You will see:
Current time:
00:00:00
3. Enter two digits for hours, and then two digits for minutes.
Seconds are reset to 00 when the time is set. Press
e
. You will see:
Current date:
01/01/90
4. Enter the date as MMDDYY and press e .
MM (month) 01-12
DD (day) 01-31
YY (year) 00-99
n
Years with 90-99 are the 20th century (e.g. 1990).
Years with 00-89 are the 21st century (e.g. 2001).
Chapter 6. Configuring the Printer
6-3