AMETEK SL Series Calibration Manual - Manual (Page 23)

Elgar Electronics Corporation Calibration
2.4.6 CC M
ODE
, L
EVEL
H
IGH
, R
ANGE
II O
FFSET AND
G
AIN
, I
TEMS
19
AND
20
1. LOAD OFF.
2. Press the
© key to go to Item 19.
3. PRES ON.
4. Set the load current as shown in Table 2-19 for the model being
calibrated.
5. PRES OFF.
6.
LOAD ON.
7. Adjust using the † keys until the shunt current and the current
setting match.
MODEL Current Setting MODEL Current Setting
SLM-60-30-150 0.00A SLH-60-120-600 0.00A
SLM-60-60-300 0.00A SLH-60-120-1200 0.00A
SLM-250-10-300 0.00A SLH-60-120-1800 0.00A
SLM-500-10-300 0.00A SLH-60-240-1200 0.00A
SLM-60-15-75 0.00A
SLH-60-240-1800 0.00A
SLH-60-360-1800 0.00A
SLH-500-60-1800 0.00A
Table 2-19. CC Mode, Level High, Range II Offset Adjustment Settings (Item 19)
8.
LOAD OFF.
9. Press the © key to go to Item 20.
SLM/SLH Calibration Manual 2-15