Paxton Superchargers Ford 5.0L Mustang GT User Manual
Page 59
P/N: 4809664 v3.1, 06/12/2012
©2012 Paxton Automotive
All Rights Reserved, Intl. Corp. Secured
59
Fig. 12C-4: Bumper Cover, Center; Cut Line
Reference
Fig. 12C-3: Bumper Cover, Passenger Side
12. BUMPER COVER/FRONT FASCIA MODIFICATION
AND REINSTALLATION, cont'd
Trim away the portion of the passenger side
b.
lower faux vent as shown, without breaking
through the louvered panel, to provide clear-
ance to the 90° rubber elbow. (See Fig. 12C-
3)
Cut away the center lower grille opening as
c.
shown, including the two (2) vertical pillars.
Only cut as far as needed to provide clear-
ance to the CAC. The correct depth is
approximately along the edge of the body-col-
or urethane section at the bottom center of
the main opening. (See Fig. 12C-4)