Paxton Superchargers Ford 5.0L Mustang GT User Manual

Page 57

P/N: 4809664 v3.1, 06/12/2012

The front bumper cover must be trimmed to provide clearance

for the Charge Air Cooler and its related ducting.

Trim the OEM radiator shroud panels as shown in Figs. 12A-1

through 12A-4. Carefully cut as necessary for best fit. Reinstall

into their original positions using the OEM plastic fasteners.

12. BUMPER COVER/FRONT FASCIA MODIFICATION

AND REINSTALLATION

Fig. 12A-2: Modified Driver's Side Shroud

Fig. 12A-1: Modified Passenger's Side Shroud

Fig. 12A-3: Passenger's Side

Fig. 12A-4: Driver's Side

Reinstall the Styrofoam front bumper cushion in its original

location using the OEM plastic push pins.

Confirm that the top of the CAC core is even with or below

the top surface of the bumper cushion and that it is cen-

tered left to right. Adjust CAC position as needed by loos-

ening the mounting fasteners.