Doremi ShowVault / IMB - Manual (Page 89)

____________________________________________________________________________________
SHV.OM.001293.DRM Page 89 of 146 Version 1.5
Doremi Labs
Note: This is a destructive process and all data (features and trailers) on the hard drives will be
lost.
10.7 Ingest From Ethernet (FTP Server)
10.7.1 Uploading Files to a Remote ShowVault via FTP
This section describes how to send package files from a local Linux machine to a networked
ShowVault for ingest.
Open a new terminal window and follow these steps:

Type: cd <foldername>/ and then press Enter.

The descriptor (folder name) is the name of the folder that contains the package files
that are sent to the networked ShowVault for ingest.
◦ An example would be to type cd dcp_package/ and then press Enter.
◦ The folder called dcp_package contains the source material to be sent to the
ShowVault for ingest.
Note: For this example, it is assumed that the movie package is in a folder called dcp_package.
In practice, the folder name can be whatever the user decides to name it.

Type: (IP address) and then press Enter.

The descriptor is the IP address of the ShowVault to send the package files to.

An example would be to type: 192.168.100.50 and then press Enter.

User will be prompted for a login name and password for the networked ShowVault.

Type the following:
◦ Name: ingest and then press Enter.
◦ Password: ingest and then press Enter.

This login will automatically put the user into the /data/incoming/ folder on the destination
ShowVault. This will bring the user to the FTP command prompt: ftp >
From here type the following in the terminal window:

Type: > prompt off // - this command turns off prompting for each individual file to be
copied.

Type: > mput * // - this command puts all files from the source directory specified
above (dcp_package/) into the /data/incoming/ directory of the destination ShowVault.