Showvault ip address, 4 showvault ip address – Doremi ShowVault / IMB User Manual
Page 25

____________________________________________________________________________________
SHV.OM.001293.DRM
Page 25 of 146
Version 1.5
Doremi Labs
4 ShowVault IP Address
All ShowVault servers are shipped with a default IP address of 192.168.100.50 on the Ethernet
port (Eth1) and a DHCP assigned dynamic IP address on the Ethernet port (Eth0)
– see section
3.3 to locate each Ethernet connector.
To change the IP address of the ShowVault server, go to M
enu → System → Networking
Configuration and follow the steps below:
A window will appear asking for a password as illustrated below (Figure 17):
Figure 17: Authentication Windows
Follow the steps according to the Ethernet Networking Configuration Wizard (Figure 18):
Figure 18: ShowVault Network Configuration
Press Enter to confirm the configuration of each page of the Ethernet Networking
Configuration Wizard. Press Tab to select an option.
Enter the desired system’s hostname and then press Enter.
o Note: It is a good idea to put the circuit location/screen number in here. For
example, “AMC_bir_scr1,” as it will be easier to identify when connecting via
VNC and in the logs.
Enter the desired system domain name and then press Enter.
System hostname -
dcp2000 used as an
example