Doremi ShowVault / IMB - Manual (Page 100)

____________________________________________________________________________________
SHV.OM.001293.DRM Page 100 of 146 Version 1.5
Doremi Labs
12.2.6 Command Node (optional)
A Command node contains the parameters associated to a specific command to be used as
part of the overall AutomationCueMacro element. These parameters depend on the type of
command defined by the Type node below (Figure 101).
Figure 101: Command Structure
Note: Dotted lines denote optional elements that can be omitted during the creation based on
Macro Editor.
12.2.6.1 Type Sub-Node
The available types of commands are listed below:
Table 1: Command Types Available
Type Description
Black Black video and silent audio signals will be generated
by the server
GPO A GPO will be sent by the server
Dowser Command concerns the projector dowser
Lamp Command concerns the projector lamp
Channel Command concerns the projector channel
Play Command will put the server in play mode
Pause Command will put the server in pause mode