Doremi ShowVault / IMB - Manual (Page 7)

____________________________________________________________________________________
SHV.OM.001293.DRM Page 7 of 146 Version 1.5
Doremi Labs
WARNING
THIS DEVICE MUST BE GROUNDED.
IMPORTANT
Power requirements for electrical equipment vary from area to area. Please ensure that the
ShowVault meets the power requirements in the surrounding area. If in doubt, consult a
qualified electrician or a Doremi Labs dealer.
AVIS
Le voltage peut différer d’un pays a l’autre. Il faut que le ShowVault soit ajusté au voltage du
pays.
LA SOURCE DE PUISSANCE DOIT AVOIR UN CONDUCTEUR CONNECTE A LA TERRE.
Toutes réparations doivent être effectuées par une pe
rsonne qualifiée. AFIN D’EVITER UN
CHOC ELECTRIQUE, VEUILLEZ NE PAS ENLEVER LE CAPOT.
ShowVault Power Ratings

AC Input: 100-240V~, 6-3A, 60-50Hz

Maximum Power Consumption: 300W
WARNING: MULTIPLE SOURCES OF SUPPLY; DISCONNECT ALL SOURCES BEFORE
SERVICING.
ShowVault Rack Mount and Thermal Information

Maximum operating ambient temperature is 35°C.
 Never restrict the air flow through the devices’ fan or vents.

When installing equipment into a rack, distribute the units evenly. Otherwise hazardous
conditions may be created by an uneven weight distribution.

Connect the unit only to a properly rated supply circuit. Reliable earthing (grounding) of
rack-mounted equipment should be maintained.
Protecting Yourself and the ShowVault
Never touch the AC plug with wet hands. Always disconnect the ShowVault from the power
supply by pulling on the plug not the cord. Allow only a Doremi Labs, Inc. dealer or qualified
professional engineer to repair or reassemble the ShowVault. Apart from voiding the warranty,
unauthorized engineers might touch live internal parts and receive a serious electric shock. Do
not put, or allow anyone to put any object, especially metal objects, into the ShowVault. Use
only an AC power supply. Never use a DC power supply.