Doremi ShowVault / IMB - Manual (Page 104)

____________________________________________________________________________________
SHV.OM.001293.DRM Page 104 of 146 Version 1.5
Doremi Labs
12.2.7.4 CueType Node (optional)
The CueType element corresponds to the type of cue used by the TriggerCue. The available
Cue Types are listed in the table below:
Table 3: Cue Types Available
Type Description
GPI Allows assignment of a GPI line and value to the Trigger
Signal Allows assignment of another signal to the Trigger
12.2.7.5 CueTypeParameters (optional)
The CueTypeParameters element contains the parameters associated to the cue type defined
in the CueType element (Figure 103).
Figure 103: TriggerCue Structure
Notes: Dotted lines denote optional elements that can be omitted during the creation based on
the Macro Editor.

For GPI Cue Type, the two following parameters have to be used: Line and Value.

The Line element specifies the GPI line number to be used for the associated command.
It contains an integer to be chosen between 0 and 7.

The Value element indicates the state of the GPI: ON (Value = 1) or OFF (Value = 2).

For Signal Cue Type, the following parameter has to be used: Name.

The Name element specifies the signal name.