Doremi ShowVault / IMB - Manual (Page 46)

____________________________________________________________________________________
SHV.OM.001293.DRM Page 46 of 146 Version 1.5
Doremi Labs
◦ RealD SBS: Enable or disable the RealD SBS output format.
◦ Sensio3D: Enable or disable the Sensio3D output format.
◦ Video Output Actions: Change the default video output format.

Macro Control:
◦ Delay: Insert a delay between actions.
◦ Purge Pending Macro: Purge the current macro execution stack.

Library:
◦ Certainty: Controls the Integrated Media Block (IMB) board (on ShowVaults only).
◦ Dolby DFC100: Allows for enabling and disabling the Dolby 3D color wheel.
◦ eCNA: Allows for controlling the external automation box.
◦ JNior Expansion Module: Allows for controlling the external automation box (9-16).
◦ JNior: Allows for controlling the external automation box (1-8).
◦ MasterImage: Controls the MasterImage 3D system
◦ QSC: Controls QSC audio products

System:
◦ System Shutdown: Allows the user to shut down the player.

Click the Cancel button to cancel the action insertion.

To add an action to the Macro Automation Cue, click on its corresponding action button
in the Action window.
6.2.3 Add Delay to the Macro Automation Cue

To add a delay action to the selected Macro Automation Cue, click the Delay button in
the Add a New Action window and define the delay parameter using the following
window (Figure 41):
Figure 41: Delay Setup Window

Click the Ok button when the setting is done.
Buttons to increase and
decrease minutes
Buttons to increase and
decrease seconds