Doremi ShowVault / IMB - Manual (Page 35)

____________________________________________________________________________________
SHV.OM.001293.DRM Page 35 of 146 Version 1.5
Doremi Labs
Figure 28: Add Device Window

Click the Add button (Figure 28). The following window will appear (Figure 29):

It is necessary to provide some configuration parameters in the window:
◦ Identifier is the friendly name of the new configured device.
◦ Serial Port is the internal device system filename the device driver will communicate
to.
◦ Usual values are: /dev/ttyS0 for embedded serial port on the motherboard and
/dev/ttyUSB0 for any USB-serial converter.

Speed, Data, Stop Bits, Parity and Flow control are usual parameters used to configure
serial communication. Refer to the original automation documentation to find out what
the correct values are. Usual value is 115200 8N1. No flow control.