Doremi ShowVault / IMB - Manual (Page 102)

____________________________________________________________________________________
SHV.OM.001293.DRM Page 102 of 146 Version 1.5
Doremi Labs
Table 2: Value Formats
Type Associated Value Format Description
GPO Possible values:
- 0: means GPO OFF
- 1: means GPO ON
- 2: means GPO Pulse mode
Dowser Possible values:
- 0: means Dowser OFF
- 1: means Dowser ON
Lamp Possible values:
- 0: means Lamp OFF
- 1: means Lamp ON
Channel Value element is an integer chosen between 0 and 64. This
integer indicates to which projector channel to switch.
VideoOutputMode Possible values:
- DolphinlorConversionDefault: default video output mode
- DolphinColorConversion444to422: video output mode
allowing playback of the corresponding 24fps Package at
48fps.
ProjectorMacro Value indicates the concerned projector macro name
12.2.6.5 PulseDelay Sub-Node (optional)
The PulseDelay element is only to be present for the GPO command when the associated value
is set to 2 (Pulse Mode). Its value is the duration, in milliseconds, during which the associated
GPO will remain ON before going to OFF (Table 2).
12.2.6.6 DeviceName Sub-Node (optional)
The DeviceName element is only to be present for the DeviceRawSendMessage command. It
will contain the name of the device to which the message has to be sent.
12.2.6.7 MessageType Sub-Node (optional)
The MessageType element is only to be present for the DeviceRawSendMessage command. It
will define the type of the message (text and binary).
12.2.6.8 Message Sub-Node (optional)
The Message element is only to be present for the DeviceRawSendMessage command. It
contains the actual message to be sent to the device.