Doremi imb cable configuration, Request dlm (doremi license manager), Adding the audio processor – Doremi ShowVault / IMB User Manual
Page 128: Figure 110), 5 doremi imb cable configuration, 6 request dlm (doremi license manager), 7 adding the audio processor
____________________________________________________________________________________
SHV.OM.001293.DRM
Page 128 of 146
Version 1.5
Doremi Labs
18.5 Doremi IMB Cable Configuration
Figure 110: Doremi IMB
Note: The IMB will need to be able to communicate with the Dolby CP850. The projector and
CP850 should be in the same sub-network.
18.6 Request DLM (Doremi License Manager)
You will need to contact Doremi Labs' customer service department to request a DLM in order
to use the Dolby Atmos feature.
Contact:
cinemaorders
To ingest the DLM, follow the steps listed in Section 8.3.
18.7 Adding the Audio Processor
Follow the procedure below to add the audio processor to the Doremi server:
On the Doremi server, open the Device Manager application by doing the following
(Figure 111):
o
Menu → Doremi Apps → Device Manager.
Figure 111: Doremi Server Home Screen
Ch. 1-8 Port
Ch. 9-16 Port
PCI-e Port