Doremi ShowVault / IMB - Manual (Page 29)

____________________________________________________________________________________
SHV.OM.001293.DRM Page 29 of 146 Version 1.5
Doremi Labs

Select Projector and click the Add button (Figure 21):
Figure 21: Device Selection Window – Projector Item Selected

The main configuration window will be updated to reflect the addition of the Projector
device. The user will be able to enter the projector parameters as illustrated below
(Figure 22):
Figure 22: Device Manager GUI – Projector Fields Setup
To perform the projector configuration, follow the steps below:

Specify a projector identifier (e.g., projector name, screen #) in the first field.
Note: The selection of primary and secondary projectors only applies to Sony SRX Projectors.
For all other projector types, please select Primary. Also, this could apply if the user were to use
dual projector for 3D (left projector would be Primary and right projector would be Secondary).
Add button
Delete
button
Projector item
selected
Projector
Identifier
Projector
model Field
DLP Head
IP Field
Test
Button
DLP Username
and Password
(do not change)
Vendor IP
Field (not
used)
Enable
subtitles