CIRCUTOR PowerStudio Series - Manual (Page 83)

PowerStudio
User Manual 83
This screen is divided between the areas, which are on the left, and the units of the selected area,
which are on the right. If ‘Add’ is clicked on the left, the following dialogue is shown to add a new area:
Once the area is created, devices can be added by accessing it with the ‘Add’ button on the right. We
are given a view as follows:
Once the list of units involved in measuring the electrical parameters of an area or use is completed, it
will become available again as a new unit and will contain averaged parameters such as voltage and
additions such as currents, powers and energies or the common and most characteristic parameters of
the units in the area.
The configured area or use will be accessible from any part of the programming with the assistant or
“Wizard”.