CIRCUTOR PowerStudio Series - Manual (Page 41)

PowerStudio
User Manual 41
Use this control to indicate a specific zoom to implement on the report page. The
values range from 50% to 1000%. This can also be configured in ‘Adjusted’ and ‘Adjust to width’ mode.
5.2.5 Miscellaneous tools
Configure formulas: Use this tool to define formulas, which may be applied to or referenced
in any of the report pages for which they have been defined. The following window will appear when the
button is clicked:
Right click the list of formulas and the following contextual message will appear
enabling cutting, copying, or pasting variables in the active report, as well as enabling formulae to be
copied between different reports or SCADA screens. Some of the options from the context menu may
not appear. Copy will only appear if there is a style selected, and the paste option only if the styles have
been copied onto the clipboard. If no formulae are selected and there are no formulae on the clipboard
when the right button is clicked the context menu will not appear.
Click ‘Delete’ to eliminate the selected formula. Click ‘Add’ or ‘Modify’ to open the formula
modification window:
Use to name and detail formulae (see appendix 11.1 Expressions and conditions). Formula
names cannot contain certain types of special characters nor contain reserved words. Reserved words
are those that match the name of an available function (see appendix 11.1 Expressions and
conditions).
Horizontal/Vertical Orientation: This tool enables the orientation of the report sheet to be
defined. Controls do not reorganize when changed from horizontal to vertical or vice versa. So some
may end up invisible by virtue of being covered by another. However, these controls have not been
deleted, and if the change is reversed they will become visible again.