Pilz PSSnet SHL 8T MRP - Manual (Page 98)

Redundancy
98
6.1 Ring Redundancy
PSSnet SHL - Web- based Interface
Pilz GmbH & Co. KG, Felix- Wankel Str. 2, 73760 Ostfildern
Figure 35: Selecting MRP-Ring version, entering ring ports and enabling/disabling
ring manager
VLAN ID If you have configured VLANs, you select
VLAN
ID 0 here if you do not want to assign the MRP-Ring configuration to a
VLAN. Note the VLAN configuration of the ring ports: Select for VLAN ID 1 and
VLAN membership U in the static VLAN table for the ring ports.
VLAN
ID > 0 if you want to assign the MRP-Ring configuration to this VLAN.
Select this VLAN ID in the MRP-Ring configuration for all devices in this MRP-
Ring. Note the VLAN configuration of the ring ports: For all ring ports in this MRP-
Ring, select this corresponding VLAN
ID and the VLAN membership T in the
static VLAN table.
Information The displays in this frame mean:
“Redundancy working”: When a component of the ring is down, the redundant
line takes over the function of the failed line.
“Configuration failure”: You have configured the function incorrectly, or there is
no ring port connection.
Parameter Meaning
Table 34: MRP-Ring configuration