Pilz PSSnet SHL 8T MRP - Manual (Page 69)

Switching
PSSnet SHL - Web- based Interface
Pilz GmbH & Co. KG, Felix- Wankel Str. 2, 73760 Ostfildern
4.4 Multicasts
69
Parameter Meaning Value range Default setting
Module Module number for modular devices,
otherwise 1.
Port Port to which this entry applies.
IGMP on Switch IGMP on/off for each port.
Switching IGMP off at a port prevents
registration for this port.
Prerequisite: In the
Switching:Multicasts:Global
Settings dialog, the IGMP Snoop-
ing mode is selected. on/off on
IGMP Forward All Switch the IGMP Snooping function
“Forward All” on/off
With the “IGMP Forward All” setting,
the device sends to this port all data
packets with a Multicast address in the
destination address field.
Prerequisite: In the
Switching:Multicasts:Global
Settings dialog, the IGMP Snoop-
ing mode is selected.
Note: If a number of routers are con-
nected to a subnetwork, you must use
IGMP version 1 so that all the routers
receive all the IGMP reports.
Note: If you use IGMP version 1 in a
subnetwork, then you must also use
IGMP version 1 in the entire network.
on/off off
IGMP Automatic
Query Port Displays which ports the device has
learned as query ports, if “automatic” is
selected in “Static Query Port”.
Prerequisite: In the
Switching:Multicasts:Global
Settings dialog, the IGMP Snoop-
ing mode is selected. Yes/No
Table 17: Settings per port