Pilz PSSnet SHL 8T MRP - Manual (Page 114)

Redundancy
114
6.3 Rapid Spanning Tree
PSSnet SHL - Web- based Interface
Pilz GmbH & Co. KG, Felix- Wankel Str. 2, 73760 Ostfildern
Figure 38: RSTP Port dialog
Oper Point-
ToPoint If this port has a full-duplex link to
another RSTP device, the value for
Oper PointToPoint will become
„true“, else it will become „false“
(e.
g., if a hub is connected). A
Point-to-point connection is a direct
connection between two RSTP de-
vices. The direct, local communica-
tions between the two switches
results in a short reconfiguration
time.
true, false auto
(is calculated):
FDX = true
HDX = false
Designated
Root Displays the bridge identification of
the designated root Switch for this
port. Bridge identification
(hexadecimal) -
Designated
Costs Display of the costs of the path from
this port to the root Switch. Costs -
Designated Port Display of the port identifier of the
port that creates the connection to
the root Switch for this port (on the
designated Switch).
Port identification
(hexadecimal) and
port number -
Parameter Meaning Value range Default setting
Table 42: Port-related RSTP settings and displays