Pilz PSSnet SHL 8T MRP - Manual (Page 96)

Redundancy
96
6.1 Ring Redundancy
PSSnet SHL - Web- based Interface
Pilz GmbH & Co. KG, Felix- Wankel Str. 2, 73760 Ostfildern
If you used the DIP switch to activate the HIPER-Ring function, RSTP is
automatically switched off.
Note: If you have configured VLANS, note the VLAN configuration of the ring
ports.
In the configuration of the HIPER-Ring, you select for the ring ports
– VLAN ID 1 and
– VLAN membership Untagged in the static VLAN table
Note: When you use the DIP switch to switch from a normal port to a ring
port, the device makes the required settings for the pre-defined ring ports in
the configuration table. The port which has been switched back from a ring
port to a normal port keeps the ring port settings (transmission speed and
mode). Independently of the DIP switch setting, you can still change all the
ports via the software.