Pilz PSSnet SHL 8T MRP - Manual (Page 95)

Redundancy
PSSnet SHL - Web- based Interface
Pilz GmbH & Co. KG, Felix- Wankel Str. 2, 73760 Ostfildern
6.1 Ring Redundancy
95
Figure 34: Selecting ring redundancy, entering ring ports, enabling/disabling ring
manager and selecting ring recovery.
Note: Deactivate the Spanning Tree protocol for the ports connected to the
redundant ring, because the Spanning Tree and the Ring Redundancy work
with different reaction times (Redundancy:Rapid Spanning
Tree:Port).
Ring Recov-
ery Select the desired value for the device for which you have activated the ring
manager. If you have selected Accelerated for the ring recovery and the sta-
bility of the ring is not meeting your requirements for your network, then select
Standard.
Note: Settings in the “Ring Recovery” frame are only effective for devices that
are ring managers.
Information The displays in this frame mean:
“Redundancy working”: When a component of the ring is down, the redundant
line takes over the function of the failed line.
“Configuration failure”: You have configured the function incorrectly, or there is
no ring port connection.
Parameter Meaning
Table 32: HIPER-Ring configuration