Pilz PSSnet SHL 8T MRP - Manual (Page 78)

Switching
78
4.5 VLAN
PSSnet SHL - Web- based Interface
Pilz GmbH & Co. KG, Felix- Wankel Str. 2, 73760 Ostfildern
Note: In a redundant Ring with VLANs, you should only operate devices
whose software version supports VLANs:
X PSSnet SHL (with L2E, L2P)
4.5.4 VLAN Port
With this dialog you can:
X assign ports to VLANs
X define the Acceptable Frame Type
X activate/deactivate Ingress Filtering
Redundancy VLAN membership
HIPER-Ring VLAN1 MU
MRP any
Network/Ring coupling VLAN1 MU
Table 23: Tagging settings of ports integrated into redundant Rings or the Ring/net-
work coupling.
Parameter Meaning Value range Default setting
Module Module of the device on which the port
is located.
Port Port to which this entry applies.
Port VLAN ID Specifies to which VLAN the port as-
signs a received untagged data pack-
et. All allowed
VLAN IDs 1
Acceptable Frame
Types Specifies whether the port may also re-
ceive untagged data packets. - admitAll
- admitOnlyVlan-
Tagged admitAll
Ingress Filtering Specifies whether the port evaluates
the received tags. on/off off
Table 24: VLAN Port dialog