Pilz PSSnet SHL 8T MRP - Manual (Page 22)

Basic Settings
22
1.2 Network
PSSnet SHL - Web- based Interface
Pilz GmbH & Co. KG, Felix- Wankel Str. 2, 73760 Ostfildern
You enter the name applicable to the DHCP protocol in the “Name” line in
the system dialog of the Web-based interface.
The “VLAN ID” frame enables you to assign a VLAN to the agent. If you
enter the VLAN ID “0” here (not contained in the standard), the agent can
be accessed from all VLANs.
The HiDiscovery protocol allows you to allocate an IP address to the de-
vice on the basis of its MAC address. Activate the HiDiscovery protocol if
you want to allocate an IP
address to the device from your PC with the en-
closed HiDiscovery software (setting on delivery: operation “on”, access
“read-write”).
The Ethernet Switch Configurator protocol allows you to allocate an IP ad-
dress to the device on the basis of its MAC address. Activate the Ethernet
Switch Configurator Protocol if you want to allocate an IP
address to the
device from your PC with the enclosed Ethernet Switch Configurator pro-
tocol software (setting on delivery: operation “on”, access “read-write”).