Pilz PSSnet SHL 8T MRP - Manual (Page 68)

Switching
68
4.4 Multicasts
PSSnet SHL - Web- based Interface
Pilz GmbH & Co. KG, Felix- Wankel Str. 2, 73760 Ostfildern
4.4.5 Settings per port (table)
With this configuration table you can enter port-related IGMP or GMRP
settings.
Parameter Meaning Value range Default setting
Send to query and
registered ports The device sends the packets with a
known MAC/IP Multicast address to all
query ports and to registered ports.
This standard setting sends all Multi-
casts to all query ports and to regis-
tered ports. The advantage of this is
that it works in most applications with-
out any additional configuration.
Application:
“Flood and Prune” routing in PIM-DM. selected/dese-
lected deselected
Send to registered
ports The device sends the packets with a
known MAC/IP Multicast address to
registered ports. The advantage of this
setting, which deviates from the stan-
dard, is that it uses the available band-
width optimally through direct
distribution. It requires additional port
settings.
Application:
Routing protocol PIM-SM. selected/dese-
lected selected
Table 16: Known Multicasts