Pilz PSSnet SHL 8T MRP - Manual (Page 102)

Redundancy
102
6.2 Ring/Network coupling
PSSnet SHL - Web- based Interface
Pilz GmbH & Co. KG, Felix- Wankel Str. 2, 73760 Ostfildern
Two-Switch coupling
Assign the device in the redundant line the DIP switch setting “STAND-
BY”, or use the software configuration to assign the redundancy function
to it.
Note: For redundancy security reasons, the combination of Rapid Span-
ning Tree and Ring/Network Coupling is not possible.