HITEC X1 Pro DC/DC Multi-Charger User Manual

Page 4

faIlure To folloW THese WarnInGs can be consId-

ered neGlIGence bY THe oPeraTor and MaY neGaTe

anY claIMs for daMaGes Incurred.
Hitec RCD USA will not be held responsible for any damages or

injuries that may occur by persons who fail to follow these warn-

ings or who fail to properly follow the instructions in this manual.

InTroducTIon (cont.)

WarnInGs and safeTY noTes

These warnings and safety notes are of the utmost importance.

You must follow these instructions for maximum safety. Failure to

do so can damage the charger and the battery and, in the worst

cases, may cause a fire.

neVer leaVe THe cHarGer unaTTended WHen

IT Is connecTed To ITs PoWer source. If anY

MalfuncTIon Is found, TerMInaTe THe Pro-

cess IMMedIaTelY and refer To THe oPera-

TIon Manual.

Warning: Be sure to read this section for

your own safety.
caution: Be sure to read this section to pre-

vent accidents and damage to your charger.
Tip: This section will help you maximize the

performance of your charger.
note: This section will provide more detailed

explanations.

caution

Tip

Warning

note