HITEC X1 Pro DC/DC Multi-Charger - Manual (Page 20)

20
lITHIuM - cHarGe Mode (cont.)
lITHIuM - balance cHarGe Mode
cell count does not match, toggle left (◄) once to return to the
previous screen and carefully check the number of cells of the bat-
tery pack before proceeding.
Once charging has commenced, the charger
will display the following real-time informa-
tion: battery type/cell count, charging current, battery voltage,
charging time and charged capactiy.
durInG cHarGInG, THe baTTerY sHould be
Placed InsIde a fIreProof/reTardanT baG
and on a fIreProof surface, aWaY froM
oTHer coMbusTIble objecTs.
If you are using a balance adaptor, during
charging you may toggle up (▲) once to
view the voltage of each individual cell.
Once the battery is fully charged, the screen will read
“
[END:fINISh]
” and the charger will emit a chiming sound.
Toggle left (◄) once to stop charging. You may toggle left (◄) at
any time during the charging process to stop charging.
caution
Li3s 1.2A 12.69V
ChG 022:43 00682
4.09 4.09V 4.09V
0.00 0.00V 0.00V
This function is for balancing the voltage of individual lithium-
polymer battery cells while charging. In order to use the Balance
Mode, the battery must have a balance lead. Charging in this mode
is different from the normal mode because the built-in processor
monitors the voltage of each individual cell and controls the input
current fed into each cell in order to equalize the voltage. Use of
a balance adaptor with any battery that has a balance lead will
improve the performance and lifespan of the battery.