HITEC X1 Pro DC/DC Multi-Charger - Manual (Page 41)

41
The X1 Pro allows you to check a battery’s total voltage, the high-
est voltage, the lowest voltage and each cell’s voltage.
Connect the battery in the same manner as you would for charg-
ing.
When you power on the X1 Pro you will be
at the “
PROGRAM SELECT”
screen. Toggle
up (▲) until you see “
LI BATT METER
”.
Toggle right (►) once and the screen will
displaly the voltage of each cell.
Toggle up (▲) or down (▼) once and the
screen will display the total voltage, highest
voltage and the lowest voltage.
Once the profile has been saved, the “
BATT MEMORY
” screen will
appear. The second line on this screen will automatically scroll
through the various parameters that have been set for this battery
profile.
To load a preset battery profile enter the “
BATT MEMORY
” screen
and toggle up (▲) or down (▼) to find the profile number you
wish to use. Toggle and hold the joysick to the right (►) for three
seconds and the profile will be loaded.
PROGRAM SELECT
LI BATT METER
4.09 4.09V 4.09V
0.00 0.00V 0.00V
MAIN 12.52V
h4.190V L4.160V
baTTerY MeMorY (cont.)
lITHIuM baTTerY MeTer