HITEC X1 Pro DC/DC Multi-Charger - Manual (Page 46)

46
The battery capacity is higher than the maxi-
mum set by the user.
The charging time is higher than the maxi-
mum set by the user.
In balance mode, the battery voltage is higher
than the maximum set by the user.
lIabIlITY eXclusIon
This charger is designed and approved exclusively for use with
the types of batteries stated in this Instruction Manual. Hitec RCD,
USA accepts no liability of any kind if the charger is used for any
purpose other than that stated. We are unable to ensure that you
follow the instructions supplied with the charger, and we have no
control over the methods you employ for using, operating and
maintaining the device. For this reason, we are obliged to deny all
liability for loss, damage or costs which are incurred due to any
misuse or operation of our products. Unless otherwise prescribed
by law, our obligation to pay compensation, regardless of the legal
argument employed, is limited to the invoice value of Hitec RCD,
USA products which were immediately and directly involved in the
event in which the damage occurred.
one Year lIMITed WarranTY
For a period of one year from the date of purchase, HITEC RCD USA,
INC. shall REPAIR OR REPLACE, at our option, defective equipment
covered by this warranty. Otherwise, the purchaser and/or con-
sumer is responsible for any charges for the repair or replacement
of the charger. This warranty does not cover cosmetic damages
OVER ChARGE
CAPACITY LIMIT
OVER TIME LIMIT
BATTERY WAS fULL
WarnInGs and error MessaGes (cont.)
WarranTY and serVIce
WarranTY and serVIce (cont.)