HITEC X1 Pro DC/DC Multi-Charger - Manual (Page 22)

22
Once charging has commenced, the charger
will display the following real-time information:
battery type/cell count, charging current, battery voltage, charging
time and charged capactiy.
durInG cHarGInG, THe baTTerY sHould be
Placed InsIde a fIreProof/reTardanT baG and
on a fIreProof surface, aWaY froM oTHer
coMbusTIble objecTs.
During charging you may toggle up (▲) once
to view the voltage of each individual cell.
Once the battery is fully charged, the screen will read
“
[END:fINISh]
” and the charger will emit a chiming sound.
Toggle left (◄) once to stop charging. You may toggle left (◄) at
any time during the charging process to stop charging.
lITHIuM - balance cHarGe Mode (cont.)
lITHIuM - fasT cHarGe Mode
Li3s 1.2A 12.69V
BAL 022:43 00682
4.09 4.09V 4.09V
0.00 0.00V 0.00V
caution
before You beGIn cHarGInG Your baTTerY,
Make sure You HaVe read and undersTand
all of THe WarnInGs and safeTY InforMaTIon
conTaIned on PaGes 4-9.
Warning
In THe fasT cHarGe Mode, lITHIuM baTTerIes
can be cHarGed WITHouT THe use of a bal-
ance adaPTor. a balance adaPTer can be
used, buT IT Is noT requIred. balance cHarGe
Mode Is recoMMended for anY baTTerY WITH
a balance lead.
See page 16 for the appropriate charging connections setup for
this operation.
note