HITEC X1 Pro DC/DC Multi-Charger - Manual (Page 18)

18
This program is only suitable for charging/discharging lithium
(LiPo/LiIon/LiFe) batteries.
lITHIuM cHeMIsTrY baTTerIes
lITHIuM - cHarGe Modes
lITHIuM - cHarGe Mode
The X1 Pro offers the following lithium charge modes: Charge, Bal-
ance Charge, Fast Charge, Storage and Discharge.
before selecTInG a cHarGe Mode, IT Is crITI-
cal THaT You selecT THe correcT TYPe of
lITHIuM baTTerY To be cHarGed. faIlure To do
so can resulT In daMaGe To THe baTTerY and
PossIble eXPlosIon.
selecting a battery Type
When you power on the X1 Pro, you will
automatically be taken to the last used
operation“
PROGRAM SELECT
” screen. If the battery type you wish
to use is different than what is displayed, toggle up ( ▲) or down
( ▼) until you see the type of Lithium battery you wish to charge.
Once you have selected the battery, toggle
right ( ►) once to enter the “
LiPo
” program
screen. The default charge mode will be “
BALANCE
,” toggle up ( ▲)
or down ( ▼) to cycle through the different charge modes. Toggle
right ( ►) once to select the desired charge mode.
before You beGIn cHarGInG Your baTTerY,
Make sure You HaVe read and undersTand
all of THe WarnInGs and safeTY InforMaTIon
conTaIned on PaGes 4-9.
Warning
Warning
PROGRAM SELECT
LiPo BATT
LiPo BALANCE
0.8A 22.2V(6S)