FeiYu Tech FY-Panda2 Autopilot - Manual (Page 46)

Guilin Feiyu Electronic Technology Co., Ltd.
Guilin Feiyu Electronic Technology Co., Ltd http://www.feiyu-tech.com [email protected]
Page 45
11.12 Auto Take-off Setting And Debugging
Attack angle: Use this to adjust the Auto take-off pitch setting(default is 25 deg).
Take Off Throttle: We suggest you set to 90.
Automatic take-off is not suitable for all model aircraft, it's more suitable for hand or
catapult take-off aircraft. We take throwing take off aircraft for example, after set the
automatic take-off parameter, please prepare for throwing take off. Click on .
Wait the motor reach maximize speed, then push the aircraft into the air. Observe the
aircraft auto take off or not, the aircraft auto climb to 50m and into RTL mode. The aircraft
will continue climb to 100m and circling around Home point waiting for your next
instructions.
During the auto take-off procedure except the throttle you still can through your RC
to manual assistant auto take-off.
11.13 Cancel Auto Take Off And Auto Landing Function
If you have already Start the auto take off or auto landing function, you can through
these 2 way to cancel it.
1.Through the GCS software ‖ ‖button.
2. Through SW2: switch to any navigation mode( ―Preset Path & Waypoint
Navigation Mode‖ or ―Return To Launch Mode‖)first, then switch to ―NULL‖.
11.14 Auto Return To Home
Setting home point
After power on the autopilot ,the first time the GPS location point will be record as
home point automatic.You can select the ― ‖button to reset the home
point,click the ― ‖button,then left click mouse on the map ,the point will be
record as the new home point.
“Fail-Safe” Return To Home