FeiYu Tech FY-Panda2 Autopilot - Manual (Page 39)

Guilin Feiyu Electronic Technology Co., Ltd.
Guilin Feiyu Electronic Technology Co., Ltd http://www.feiyu-tech.com [email protected]
Page 38
11.8 Auto Landing
PandaⅡ system can select the method of the auto landing
as ‖LINEAR‖or‖PARACHUTE . Select ―Menu---Autopilot Setting---Landing Setting‖to
configurate the auto landing model and the altitude of open parachute.
( 1 ) LINEAR
In order to realize the auto landing function you need to set 2 point to make sure the
landing air route before take-off. One is landing start point, move the plane which GPS
position is good to the starting point of the landing air route ,click the button
― ‖to set the landing start point ―A‖ .Then move the plane to the
ending point of the landing air route,
click the button ― ‖to set the landing
end point ―B‖ .The auto landing air route is A-B, and point ―B‖ is the aircraft
landing point. Point ―C‖ is the automatically generated downward spiral point during the
auto landing procedure. Automatic landing will consists of the following three stages.