FeiYu Tech FY-Panda2 Autopilot - Manual (Page 33)

Guilin Feiyu Electronic Technology Co., Ltd.
Guilin Feiyu Electronic Technology Co., Ltd http://www.feiyu-tech.com [email protected]
Page 32
Step Six: Gyro and airspeed sensor Initialization
Gyro Initialization : Please click on the ―Initialize the gyro‖ button to do the gyro
reset. When doing the gyro reset, please keep the Panda
Ⅱ static and you can not to do
the gyro rest during the flight. It‘s better to do the gyro reset before each flight.
Airspeed sensor initialization: Put the aircraft keep static, you can use your hand
to cover the port of the airspeed , and do not let the wind interfere with the airspeed
sensor, then click the button ―Initialize the airspeed‖.After that please check whether the
airspeed showing on GCS is in the vicinity of 0-3.Due to the sensor error, there are some
tiny airspeed value on the ground is normal.
The basis parameters of the Panda
Ⅱ have been configuration completely, you can
go for a test flight.