FeiYu Tech FY-Panda2 Autopilot - Manual (Page 44)

Guilin Feiyu Electronic Technology Co., Ltd.
Guilin Feiyu Electronic Technology Co., Ltd http://www.feiyu-tech.com [email protected]
Page 43
information (if there is no storage space already, but you still taking photo, it will through
cover the first generate file to record the new file, it will through cover the first generate
file to record the new file). You can connect the Panda2 to the GCS software through the
Data Radio to read the photo-taken POS information (only after GPS positioning success
that will be generated the information file). In order to faster to get POS data, you can use
USB-TTL data cable connected the Panda
Ⅱ autopilot to the computer USB port. Open
the GCS 5.1 and make serial port connection suc
cess. Select ―Menu---Read Pos Data‖, it
will load
the ―POS INFORMATION READ ‖ dialog box .(If you are using the Panda Ⅱ
V1.2 firmware or above, you can only read POS information via FYGCS 5.1 )
―Read File List‖
Click the ‖ ‖in the file list title display bar will display files in order
(The files is named according to year, month, date , minutes and seconds on the flight
day which GPS record. The sequence number will + 1 after record a new file). It‘s takes
time if POS information record module contains many files, the state hints bar will have
"read the file list end!" tip when read success.