FeiYu Tech FY-Panda2 Autopilot - Manual (Page 32)

Guilin Feiyu Electronic Technology Co., Ltd.
Guilin Feiyu Electronic Technology Co., Ltd http://www.feiyu-tech.com [email protected]
Page 31
Step Five :The cruise speed and hovering flight radius
setting
Target speed setting (Default setting is 60km/h).The flight speed is very important,
you can not optional Settings. The speed must can keep aircraft keep normal flight. We
suggest not increase the settings too high, it may cause very unusual flying behavior and
may result in damage of your aircraft due to excessive throttling.
You can observe the "GPS velocity" on GCS software when in flight , and to
evaluate the aircraft's cruising speed.
Circle radius :It means the radius of the hovering flight .Speed of the plane which
achieve 60 km/H , the circle radius should be set to more than 80 meters .We suggest
that the circle radius should be set more than 1.6 times of the flight
speed.Such as the speed of the plane in 100 km/H ,the circle radius suggest that set
in 160 meters .If the circle radius is set too small , hovering flight may not be able to
normal ,the plane will decrease flight altitude, even cause the dangerous of air crash.