Eurocom Uno 2.1 - Manual (Page 35)

Quick Start Guide
1 - 10 On Screen Display Indicators
1
On Screen Display Indicators
Press the function menu button (see Table 1 - 2, on page 1 - 9 ) to bring up the On Screen Display. The OSD
provides visual indicators for brightness, volume, WLAN, Bluetooth and camera power toggle (note that the
camera and Bluetooth power indicators will only display if the modules are included in your purchase configu-
ration) are available when the OSD driver is installed (see
“On Screen Display” on page 4 - 6 ).
Table 1 - 3 - On Screen Display Indicators
The indicators will appear when the computer boots up, or resumes from a power saving state, in order to display
the current power status of the camera and/or Bluetooth/WLAN modules. The OSD indicators will appear if you
adjust the brightness or volume, and will also allow you to adjust the power status of the camera and/or Blue-
tooth/WLAN modules by using the mouse to click on the icon (note that this system does not display the Win-
dows Mobility Center). If your purchase configuration includes the Multi-Touch Panel (Windows 7 only) you
may use a finger to slide along the bars under the on-screen symbols to adjust the volume and brightness and
controls, or to press the on/off buttons to toggle power to the camera and/or Bluetooth/WLAN modules.
OSD Icon Description OSD Icon Description
Volume Decrease/Increase WLAN Power Toggle
Brightness Decrease/Increase Bluetooth Power Toggle
Camera Power Toggle