Problems & possible solutions, Problems & possible solutions -7 – Eurocom Uno 2.1 User Manual
Page 164
Troubleshooting
Problems & Possible Solutions 8 - 7
8
Problems & Possible Solutions
Problem
Possible Cause - Solution
The computer feels too
hot.
Make sure the computer is properly ventilated and the Vent/Fan intakes are not blocked. If this
doesn’t cool it down, put the system into Hibernate mode or turn it off for an hour. Make sure the
computer isn’t sitting on a thermal surface. Make sure you’re using the correct adapter.
Nothing appears on
screen.
The system is in a power saving mode. Press the power button or any configured sleep/resume
key combination.
The screen controls need to be adjusted. Press the brightness buttons to adjust the settings. If
you’re connected to an external monitor, make sure it’s plugged in and turned on. You should also
check any attached monitor’s own brightness and contrast controls.
The screen saver is activated. Press any key on the keyboard.
You have pressed the Screen Power Toggle Button
to turn the display off. A quick press of
the button will toggle the display on/off (see
No image appears on the
external monitor I have
plugged in and powered
on.
You haven’t installed the video driver and configured it appropriately from the Control Panel.
See for instructions on installing and configuring the video driver.
The sound cannot be
heard or the volume is
very low.
The volume might be set too low. Check the volume control in the Settings menu in the Charms
Bar in Windows 8 (see
“Audio Features” on page 2 - 8
), check the volume control in the
Volume Control Panel in the Windows 7 taskbar, or use the volume buttons to adjust the setting
(see
“Audio Features” on page D - 14
).