Eurocom Uno 2.1 - Manual (Page 176)

Intel Video Driver Controls
Display Devices & Options B - 5
B
Display Devices & Options
Besides the built-in LCD you can also use an external monitor/flat panel display/TV
connected to the external monitor port as your display device. The table below out-
lines the display options.
Intel Display Mode Description
Single Display
One of the connected displays is used as the display
device
Clone Displays
Both connected displays output the same view and may
be configured independently
Extended Desktop
Both connected displays are treated as separate devices,
and act as a virtual desktop

Default Display Mode
The initial default dis-
play mode when first at-
taching an external
display is set to Extend-
ed Desktop Mode.
You can use the Intel(R)
G&M control panel to
adjust this setting.
Subsequent to any re-
start/shutdown or re-
moval of display device,
the system will retain the
last mode set before the
restart/shutdown or re-
moval of display device.
Table B - 1
Display Modes

Attaching Displays
When you first attach an external display you may find that the desktop does not occupy
the full screen area. Use either the display’s auto adjust/configure controls, or the Intel(R)
G&M control panel to configure the full screen display.