Eurocom Uno 2.1 - Manual (Page 191)

D - 4 On Screen Display Indicators/Buttons
Windows 7
Windows 7
On Screen Display Indicators/Buttons
Press the function menu button for about two seconds to bring up the On Screen Display. The OSD provides
visual indicators for brightness, volume, camera power toggle and WLAN/Bluetooth power toggle (the camera,
WLAN and Bluetooth power indicators will only display if the modules are included in your purchase configu-
ration) when the OSD driver is installed (see page
“On Screen Display” on page D - 24 ).
Table D - 3 - On Screen Display Indicators
The indicators will appear when the computer boots up, or resumes from a power saving state, in order to display
the current power status of the camera and/or Bluetooth/WLAN modules. The OSD indicators will appear if you
adjust the brightness or volume, and will also allow you to adjust the power status of the camera and/or Blue-
tooth/WLAN modules by using the mouse to click on the icon (note that this system does not display the Win-
dows Mobility Center). If your purchase configuration includes the Multi-Touch Panel you may use a finger to
slide along the bars under the on-screen symbols to adjust the volume and brightness and controls, or to press
the on/off buttons to toggle power to the camera and/or Bluetooth/WLAN modules.
OSD Icon Description OSD Icon Description
Volume Decrease/Increase Camera Power Toggle
Brightness Decrease/Increase Bluetooth Power Toggle
WLAN Power Toggle