Typetranslatorruleset, Typetranslatorruleset -12, 3 typetranslatorruleset – Echelon i.LON 100 e2 Internet Server User Manual
Page 205

13.2.1.3 TypeTranslatorRuleSet
i.
LON 100 Internet Server Programmer’s Reference
The following example uses the TypeTranslatorRuleSet function to create a Type Translator
Rule defintion that will convert data points of type SNVT_lev_disc to data points of type
SNVT_switch. The rule takes a single data point as input, and returns a single data point as
output.
Use the TypeTranslatorRuleSet function to create a new Type Translator Rule, or to
overwrite the configuration of an exisiting Type Translator Rule. Each time you use this
function to create a new Type Translator Rule, an XML file for that rule will be generated in
the /root/config/software/TranslatorRules directory of your
i.
LON 100. Once the file has been
generated, you can reference the rule when creating a Type Translator, as described in
Chapter 12.
The previous section, TypeTranslatorRuleGet, describes the properties and elements you can
use to define each Type Translator Rule.
NOTE: Type Translator Rules created with the TypeTranslatorRuleSet function are not
supported by the
i.
LON 100 Configuration Software.
Parameter
FN_EQ on> 13-12