User guide, 2 packing list, 3 specifications – Eagle Tree Vector User Manual
Page 8
USER GUIDE
8
2.2 Packing List
Your package should include the following:
Vector Controller
Current Sensor/PSU (Deans
TM
, XT60
TM
or wire leads version),
GPS/Magnetometer (GPS/Mag), with GPS stand, clip and screw
Video, Audio (not shown), GPS, and Receiver Harnesses
2.3 Specifications
Supported Airframes:
o
Traditional fixed wing, Elevon, and V-tail planes
o
Tricopter, Quadcopter, and Hexacopter multirotors
Recommended Airframes:
the Vector is
not recommended for large or heavy airframes, due to no or
limited testing on these types of models at this time
. Examples: giant scale fixed wing models, gas or
nitro models, turbines, or multirotors larger than 650mm are not recommended.
Video formats: composite NTSC and PAL (autodetect)
Servo/ESC Output framerate:
o
Fixed wing: adjustable up to 400Hz
o
Multirotor (including tricopter yaw servo): 400Hz
Dimensions (L x W x H, approximate):
o
Controller: 65mm x 33mm x 14mm
o
GPS/Mag: 35mm x 24mm x 15mm
o
Current Sensor/PSU (with Deans™): 42mm x 19mm x 18mm
Mass (approximate):
o
Controller: 21g
o
GPS/Mag: 13g
o
Current Sensor/PSU (with Deans™): 15g
Current Sensor/PSU
o
Peak measured current: 140 amps (see section 3.4)
o
Max pack voltage: 6s/25.2V
o
Maximum 12V PSU current: 1A
o
Maximum 5V PSU current: 1A