Eagle Tree Vector - Manual (Page 23)

USER GUIDE
23
The chart below shows typical receiver and servo/ESC connections for these airframe types.
* The Receiver Output and Vector Rx Harness sections do not apply to SPPM or S.BUS™ receiver modes.
Airframe Vector
Airframe Type
Receiver Output* Vector Rx
Harness* Vector Output Servo/ESC
Connection at
Model
Traditional Fixed Traditional
Fixed Rudder Rud Rudder/M1 Rudder Servo
Aileron Ail Aileron/M2 Aileron Servo
Elevator Elv Elevator/M3 Elevator Servo
Throttle Thr Throttle/M4 Motor ESC or Throt
Servo
2/3 position
Mode Switch Mod N/A N/A
Gain Knob or
Submode switch Aux N/A N/A
Fixed Wing with 2 nd
Aileron, Flaperon,
Elevator, or Rudder
(with Tx Mixing)
Traditional
Fixed
Rudder
Rud
Rudder/M1
Rudder Servo
Aileron Ail Aileron/M2 Aileron Servo
Elevator Elv Elevator/M3 Elevator Servo
Throttle Thr Throttle/M4 Motor ESC or Throt
Servo
2 nd Aileron,
Elevator, Rudder
or Flaperon
Aux Aux1/M5 (or
N/A) 2 nd Aileron,
Elevator, Rudder or
Flaperon
2/3 position
Mode Switch Mod N/A N/A
Elevon or V-Tail
without Ailerons Elevon Rudder (if used) Rud Rudder/M1 Rudder Servo
Aileron Ail Aileron/M2 Elevon Servo 1
Elevator Elv Elevator/M3 Elevon Servo 2
Throttle Thr Throttle/M4 ESC or Throttle
Servo
2/3 position
Mode Switch Mod N/A N/A
Gain Knob or
Submode switch Aux N/A N/A
V-Tail with Ailerons V-Tail Rudder Rud Rudder/M1 V-Tail Servo 2
Aileron Ail Aileron/M2 Aileron Servo
Elevator Elv Elevator/M3 V-Tail Servo 1
Throttle Thr Throttle/M4 Motor ESC or Throt
Servo