Eagle Tree Pro, Glide, Flight and Boat Seagull Wireless Telemetry and Data Recorder - Manual

Copyright © 2003-2010 Eagle Tree Systems, LLC
User Manual for the Seagull Wireless Dashboard Telemetry and Data Recorder Systems
Pro, Flight, Glide, Boat
Document Version 4.4
Please read this manual before using your new system.
Thank you for your purchase! This instruction manual will guide you through the installation and operation of
your Pro, Glide, Flight, or Boat Seagull Wireless Dashboard Telemetry or Data Recorder System (the System).
The System provides most of the functionality of systems costing up to many times more, while featuring the plug
and play, robustness and ease of use benefits of our entire product line.
Please read the entire manual carefully before proceeding. If, after you read the manual (including the
Troubleshooting sections!) you have further questions or problems, please visit our web support page for
additional support options, at
http://www.eagletreesystems.com/Support/support.html .
Please visit our support web page for the latest version of this manual, in case changes were made after your
version was published.
Intended Uses
The System is designed to be used to log and transmit data in remote controlled models, where data recording and
wireless telemetry are desired. The system is intended exclusively for recreational use in model planes, boats and cars.
Using the system for other applications is not supported. Further, using the System in situations where its use or
failure could result in loss of life, bodily injury or property damage is expressly prohibited.
Packing List
Your System includes the following components:
Flight, Pro, and Boat System Packing List
•
Wireless Telemetry Dashboard Receiver and transmitter (not included with Data Recorder-only Systems)
•
Flight, Pro or Boat Data Recorder
•
Airspeed tubes: machined brass and aluminum Prandtl style pitot-static tube, approximately 3 feet (1 meter) of
small diameter silicon hose, and plastic ‘T’ fitting (Boat systems do not include T fitting)
•
Temperature sensor
•
RPM sensor with magnets
•
4 Servo Y cables (Boat system includes only 2 Y cables)
•
USB cable,
•
plastic clip for mounting dashboard to radio antenna,
•
Windows CD,
•
Optional: Rubber Antenna with SMA connector for SMA Dashboard option
•
Note: The 900 MHz/1 Watt Pro system includes Rubber Antennas for both the Dashboard and Transmitter