Ditch Witch JT60AT - Manual (Page 98)

Conduct a Bore - 98
JT60/JT60 All Terrain Operator’s Manual
Clamp Pipe
Clamp Pipe
Clamp on pipe when joint is centered between
wrenches (1 and 2). Always clamp on the larger
diameter areas on either side of the tool joint
face.
Turning shaft can kill you or crush arm or leg. Stay away.
To help avoid injury, clamp pipe only where shown. Clamping anywhere else on the pipe
will weaken the pipe. Pipe can later break, even when operating under normal loads.
j40om066w.eps